Quote:
Originally Posted by Rojoryu
It has an aftermarket one installed. It was not registering any pressure until the throttle was blipped. I cranked up again this morning and it seems fine. I dropped the oil and didn't see anything weird in it. I’m thinking maybe a blockage in the oil passages. I probably went overkill on the RVT when I changed the gallery gaskets.
|
Well gallery gaskets should not need ANY RTV. I did coat my OEM new gaskets in really light RTV at the same time.
Your best bet is to install a manual gauge or wire up the glowshift manually so it can give you as quick of a reading as possible.
Depending on your findings I would change the oil and filter and inspect the filter as previously stated.
Continue to monitor this.