Nissan 370Z Forum - View Single Post - One-wheel peeling. Rear bar too stiff or fried diff?

justin_boy · 05-17-2022, 02:25 AM

I boiled 90 weight twice on the stock vlsd and also toasted it. Then I put 140 weight in the stock vlsd and didn’t boil it again but it was still toast. Seb just installed a wavetrac and we used 140 weight again. As for the diff, it’s insane. You can wot out of corner exit and slide super minimally. Only difference is you have to keep it loaded especially in high speed transitions but other than that I would 10/10 recommend

05-17-2022, 02:25 AM	#16 (permalink)
justin_boy Track Member Join Date: May 2015 Location: woodland hills Posts: 600 Drives: z34 Rep Power: 8367	I boiled 90 weight twice on the stock vlsd and also toasted it. Then I put 140 weight in the stock vlsd and didn’t boil it again but it was still toast. Seb just installed a wavetrac and we used 140 weight again. As for the diff, it’s insane. You can wot out of corner exit and slide super minimally. Only difference is you have to keep it loaded especially in high speed transitions but other than that I would 10/10 recommend Last edited by justin_boy; 05-17-2022 at 02:29 AM.