I still need to install the rear cambers arms and toe bolts (delivered on Fri!), but I was able to use a cut off tool (worked perfectly) to trim off the inner portion of the fender trim. This is a great option for those who like the styling and want to keep it. They really do take up so much space in the wheel well, so if you want any type of proper fitment you will definitely need to either completely remove them or do what I just did and trim them off. I was amazed to see how much more space my tires/wheels have now. I also removed the 25mm spacers...honestly not sure what I was thinking. Lesson learned for sure. Let me know if anyone needs 25mm spacers. I installed 20mm spacers and really dig it. I still haven't test driven the car to make sure it doesn't rub anymore. I did, however, put the car on jack stands, and used the jack to see if it would make contact with any part of the fender under compression. It can get close, but it clears. Again, definitely need to test drive to be certain. I think I will test fit some 15mm spacers while I'm at it, but definitely don't want to go lower than that. I'm just glad and thankful to everyone who gave me advice on finding a solution for this issue. I'll report back again once I get time to install the camber arms and toe bolts AND finally get an alignment. Kind of want to get some FUCAs now too...
Last edited by babyzilla; 03-06-2022 at 09:43 PM.
|