Quote:
Originally Posted by BGTV8
If you have the rotor templates, talk to Alex at Brypar in Sydney (Australia). He can match pretty much any rotor and rotor hat.
www.brypar.com or facebook.com/brypar they do a lot of motorsport rotors for the Oz GT3 championship and lots of top line race series here.
If you do not want the cost that comes with AP rotor rings, OR someone like BRYPAR to make some from their own blanks. then the VE and VF Holden Commodore HSV came with AP 6-pot calipers and DBA do a 5000-series rotor ring to suit (368mm (14.5") x 32mm. I know you wanted 36mm fronts. but the DBA's could be an option.
Check out DBA performance catalog available to download here: https://dba.com.au/dba-catalogues/do...df-catalogues/
I can see at row 120 on page 17 of the performance catalogue there is a 370x36mm rotor ring
The alternative is to go to AP in the UK as their 14.5" x 36mm is here:
https://apracing.com/race-car/brake-...36mm-thickness
Part no (left and right) is CP5772-6072/6073
Details: https://apracing.com/race-car/brake-...p5772-60726073
I think you can invite Essex to "go forth and multiply". Similar research required for rears. |
Great info man, thank you for this. We're okay paying for AP's, the Jhood rotors are amazing, its just trying to find a direct replacement has been difficult since Stillen lost the contract and Essex took over. All the brackets were proprietary to Stillen, so Essex has has to "start over" with the kits, which they aren't using the same sizes.
We have all the templates PDF's for wheel fitments for clients, so should help with the rotor info.