Nissan 370Z Forum - View Single Post - Combination Oil Sender. Why does no one talk about this?

Averying · 01-11-2022, 01:09 PM

Assuming you guys have aftermarket oil coolers with -AN lines, why not use an AN tee fitting with 1/8” npt like this? https://www.anhosefittings.com/an-ma...iABEgJO6PD_BwE

This gives you more flexibility when mounting the sensor (before/after oil cooler, driver or passenger side of car, and orientation of the sensor coming out of the fitting). I had to run this solution with my GTM oil filter relocation kit because the oil filter relocation lines blocked the OEM pressure sensor location. Haven’t had any issues at all.

Sent from my iPhone using Tapatalk

01-11-2022, 01:09 PM	#8 (permalink)
Averying Enthusiast Member Join Date: May 2018 Location: Rhode Island Posts: 479 Drives: '09 370Z, '03 G35 Rep Power: 14419	Assuming you guys have aftermarket oil coolers with -AN lines, why not use an AN tee fitting with 1/8” npt like this? https://www.anhosefittings.com/an-ma...iABEgJO6PD_BwE This gives you more flexibility when mounting the sensor (before/after oil cooler, driver or passenger side of car, and orientation of the sensor coming out of the fitting). I had to run this solution with my GTM oil filter relocation kit because the oil filter relocation lines blocked the OEM pressure sensor location. Haven’t had any issues at all. Sent from my iPhone using Tapatalk __________________ 2009 Sport Touring \| Platinum Graphite \| GTM Stage 1 Supercharger \| BC BR Coilovers \| Hotchkis Swaybar \| Z1 FUCAs \| AME TM-02 Wheels \| Z1 2-piece Front Rotors \| Z1 Clutch & Flywheel \| Invidia Gemini Catback \| GTM Resonated Test Pipes