Nissan 370Z Forum - View Single Post - Read & reset codes via Openport 2.0 Tactrix & Consult

2011 Nismo#91 · 12-23-2021, 06:51 AM

If you want to write to the ECU then you will need one of the tuning programs. ECUtek or Uprev. There are others but not nearly as good. As far as reading and logging there are many many applications that do that with a simple ODBII reader and a free or nominal cost application. Then there are ones in the 200-500 range that would do most programing that an average person would need.

12-23-2021, 06:51 AM	#2 (permalink)
2011 Nismo#91 A True Z Fanatic Join Date: Mar 2011 Location: NJ Posts: 2,401 Drives: slowly Rep Power: 40569	If you want to write to the ECU then you will need one of the tuning programs. ECUtek or Uprev. There are others but not nearly as good. As far as reading and logging there are many many applications that do that with a simple ODBII reader and a free or nominal cost application. Then there are ones in the 200-500 range that would do most programing that an average person would need. __________________ GTR TT 493Whp/431lbft, Ecutek, Southbend 6puck,Quaife, RPM RollBar 4Point, R888R, JRZ RSPro F(10R/10C) R(10R/6C) 1000f500r inlbs+150inlbs Tender, SPL everywhere.Full Specs