Nissan 370Z Forum - View Single Post

Spooler · 12-14-2021, 11:30 AM

If you are still using the stock plastic intake waffle just get an Omni 4 bar map sensor. For some reason they only have issue while being used on a aluminum intake manifold. No maf's needed since your car will be tuned hybrid with Ecutek. If you
are using Uprev, that is not the best solution. Just go Ecutek and be done with it. To get 600whp you will only need to run 12-14psi of boost.

12-14-2021, 11:30 AM	#6 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,797 Drives: 2013 Nismo 370z Rep Power: 2684392	If you are still using the stock plastic intake waffle just get an Omni 4 bar map sensor. For some reason they only have issue while being used on a aluminum intake manifold. No maf's needed since your car will be tuned hybrid with Ecutek. If you are using Uprev, that is not the best solution. Just go Ecutek and be done with it. To get 600whp you will only need to run 12-14psi of boost. Last edited by Spooler; 12-14-2021 at 11:33 AM.