Quote:
Originally Posted by JVerge5363
E85 is available about 45 min. away from me so it's not really ideal. 93 Octane is readily available so that's why I am leaning towards the methanol injection. I'm gonna put the 10lb pulley back on now that I'm not getting any belt slip and see how that goes since I was making more boost with that one. I'd like to try and crack 600 whp and I'm almost positive that is not possible on just 93 Octane alone. Just a side note I measured my jackshaft pulley as 3.19 and supercharger pulley as 2.89. I was curious compared to the setup you we're running.
|
Did you buy your kit used? The stock jackshaft and sc pulley's are 3.20. So, your jackshaft is the stock pulley which makes sense as that's the one you don't want to change if you don't have to. They don't make a 2.89 so your sc pulley would be a 2.85 or 2.95 if measured correctly which means someone had to have changed it at one time. If that's the case, you should be running a 3" sc tensioner pulley instead of the stock 2-1/2" in order to take up the additional belt slack that going with a 2.85 or 2.95 is going to cause.
__________________
Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo
700+whp
Last edited by redondoaveb; 09-07-2021 at 09:38 PM.
|