Quote:
Originally Posted by redondoaveb
I had the 9lb pulley, 3.47 jackshaft pulley and 3.00 sc pulley. I was just under 17 psi with that set up. I had to run e85 at that psi but since I also ran a wastegate, I could turn the boost down when I ran 91 octane (I ran flex fuel). You don't have access to e85?
You're wondering about the Z1 ported upper and lower intakes? I don't think you're going to gain much with them.
|
E85 is available about 45 min. away from me so it's not really ideal. 93 Octane is readily available so that's why I am leaning towards the methanol injection. I'm gonna put the 10lb pulley back on now that I'm not getting any belt slip and see how that goes since I was making more boost with that one. I'd like to try and crack 600 whp and I'm almost positive that is not possible on just 93 Octane alone. Just a side note I measured my jackshaft pulley as 3.19 and supercharger pulley as 2.89. I was curious compared to the setup you we're running.
__________________
TopgunZ C38R SC // Rotrex // CJM // ID 1340cc // Walbro 525 Hellcat // Ecuteck // 4 Bar Map Sensor // Z1 Oil Cooler // Tial // Prosport JDM // South Bend Stg 3 // ACT // RT Tuning Install and Tune // Motordyne ART // Berk CBE // Michelin PS4S 305/30/19R 265/35/19F
|