Quote:
Originally Posted by Mxzx
So I just made a harness to check in between pressure switch and ECM, I am getting 5v into the switch and 1v out, which seems to jive with the chart in the manual for 90psi of pressure. I also pulled the IPDM E/R again and took it all apart, the only relay I could find is the start control relay.
I have an appointment at Nissan to diagnose for $139, but not until the 10th. I'm at a loss.
|
Good troubleshooting!
I data logged my AC pressure sensor and it was also 1.0 volts with the AC on and blowing cold with outside temps at 32C / 86F.
Please update us when you know more.