Quote:
Originally Posted by oldskoolchuk
That's where I'm at now. The builders and owner who had the build done initially decided to delete the passenger side pcv to make room for turbo piping, they were running it on pump gas at around 425whp. Since I've got it I've switched to e85, and as soon as we noticed the lack of a pcv on that side we fixed it... which took me machining up an elbow fitting at work by reverse engineering the pcv valve dimensions and then making a hose barb that threads into that to get a low enough profile fitting that would fit under the pipes. The problem is the damage is already done, and now that there's a pcv (feeding to the intake) I'm blowing big blue smoke at idle. So the answer is clear, swap another motor in for the time being and enjoy my 600, and build the one that's in it for more power and hopefully also reliability. The goal is to beat the CTS-Vs and the boosted mustangs with Coyotes and 10 speeds in the local late night racing scene... and so here I am looking for wisdom and advice.
|
Ok, swapping in a new to you stock long block and then using your old motor to build up w/o going thru as much downtime is a good idea. Also, then when you swap again, you’ll have a spare long block on deck just in case. Even a fully built motor done by the best shop around and tuned by the best tuner etc could still easily go boom just bc at those power levels, 800+ whp, there’s just no guarantees on anything. Be prepared to be chasing down little gremlins on a regular basis too, that’s part of the game at that level.
You’ll see in spooler’s thread, but your going to need to address your 6mt at some point, I’m assuming you’ve got a mt cause the at won’t cut it at that level
afaik. You should look into Phunk’s thread about swapping in a bmw dct so you can put the power done better and w/o trans breakage. He’s CJ Motorsports btw, great guy and great company.
Alright, so you want to be hot sh1t at the local drags and do it in a 370z platform.
First, I’m going to assume all this will be taking place at the local drag strip.
Two, as others have already said, you need to grow your skills into the car. Master 500whp, then 550, then 600, etc. experiment with various tire setups, work on your 60 ft, work on your shifting, car control down the track. Work on improving not just your times but also your et’s. Get safety equipment professionally installed, like a cage etc.
Three, you’ll probably end up needing a reliable daily driver, cause you will break sh1t, even at 500whp once in a while.
There’s more but I’m kinda tired and I’ve got other sh1t to say…