Nissan 370Z Forum - View Single Post

djburke87 · 07-27-2021, 01:14 PM

I have my oil cooler all installed except the sandwich plate.

So when I go to put the sandwich plate on, I tighten the plate center fitting onto the original filter fitting. When it is tightened down all the way, the plate is still fairly loose. I can easily spin it. Am I missing a washer or something? All I have is the fitting and the plate with a seal on the engine side. Is there supposed to be something else?

As it sits, if I put oil in it, it will just end up on the ground.

Sent from my SM-G973U using Tapatalk

07-27-2021, 01:14 PM	#1 (permalink)
djburke87 Base Member Join Date: Apr 2020 Location: Staunton, VA Posts: 72 Drives: 2018 370z Nismo Rep Power: 5	Z1 Oil Cooler Sandwich Plate I have my oil cooler all installed except the sandwich plate. So when I go to put the sandwich plate on, I tighten the plate center fitting onto the original filter fitting. When it is tightened down all the way, the plate is still fairly loose. I can easily spin it. Am I missing a washer or something? All I have is the fitting and the plate with a seal on the engine side. Is there supposed to be something else? As it sits, if I put oil in it, it will just end up on the ground. Sent from my SM-G973U using Tapatalk __________________ 2018 Nismo - Z1 Cold Air Intake, Z1 Silicone Hoses, Catalytic Converter Delete, Remark Axleback V1 Exhaust