Nissan 370Z Forum - View Single Post - Help with Subframe Toe Bolt Hole for SPC?

Yardyknow · 07-25-2021, 02:22 PM

Hi guys! Wanted to ask the community about my current problem with my toe bolt situation. I went to buy the SPC toe bolt to replace the OEM one as my alignment guy said it was "binding". Upon replacement it turns out that the original oval hole was now enlarged quite a bit. I'm guessing the previous owner tried installing the SPC bolt as well in the past and messed up?

TLDR; Is the hole fine for me to use with the SPC rear toe bolt? It looks a bit wider than I hoped. Would get the eccentric lockout kit but I run bags so I can replace the bucket.

Album: http://imgur.com/a/eEAd0KF

07-25-2021, 02:22 PM	#1 (permalink)
Yardyknow Base Member Join Date: Nov 2020 Location: San Diego, CA Posts: 22 Drives: 16 Nissan 370Z M6 Rep Power: 5	Help with Subframe Toe Bolt Hole for SPC? Hi guys! Wanted to ask the community about my current problem with my toe bolt situation. I went to buy the SPC toe bolt to replace the OEM one as my alignment guy said it was "binding". Upon replacement it turns out that the original oval hole was now enlarged quite a bit. I'm guessing the previous owner tried installing the SPC bolt as well in the past and messed up? TLDR; Is the hole fine for me to use with the SPC rear toe bolt? It looks a bit wider than I hoped. Would get the eccentric lockout kit but I run bags so I can replace the bucket. Album: http://imgur.com/a/eEAd0KF