Nissan 370Z Forum - View Single Post

gbrettin · 07-15-2021, 11:24 AM

Flushed out the tank again. Looks like the bottom needs a slight scrub and then I'll be good.

Passenger side up pipe went on reasonable well. Driver's side has a tad too much heat shield and insulation. Looks like I will need to remove the belt and alternator before that goes on. Alternator will likely get touched by the ginder too.

I took the opportunity to paint the BSI letters on the gates with white VHT paint. The paint dried for 24hrs. The gates were taped off and then hit with high temp clear.

07-15-2021, 11:24 AM	#773 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,282 Drives: Tricycle Rep Power: 589151	Flushed out the tank again. Looks like the bottom needs a slight scrub and then I'll be good. Passenger side up pipe went on reasonable well. Driver's side has a tad too much heat shield and insulation. Looks like I will need to remove the belt and alternator before that goes on. Alternator will likely get touched by the ginder too. I took the opportunity to paint the BSI letters on the gates with white VHT paint. The paint dried for 24hrs. The gates were taped off and then hit with high temp clear.