Quote:
Originally Posted by The Weapon
Its probably your harness or pins. That gave me the most trouble but Ryan helped me get it all sorted out. I just have one issue and its a software bug with turning off the fan while the air handler is in any mode except auto. He documented it on his site and is working on a update.
I had my pins backwards or not pushed in far enough. The dial harness was the most difficult.
The board would power on but ac dials wouldnt work but once the pins were fixed it worked.
I didnt use the io outs either.
As far as no audio it sounds like a larger issue with your install as the board doesnt handle any of the audio signals except the mic passthrough.
Can you provide more detail on how you connected the audio componenets?
|
I shot a message to Ryan to see if he could help be diagnose and troubleshoot the board further. If new haranasses are needed, I'd need some help.
In regards to the audio issues. I picked up the audio kit from Brainiac as well. I apologize for not knowing the connector names. I plugged in the big OEM connector into the black Brainiac box. I connected the 2 "in" RCA cables to the black box and connected the "out" rca cables to the sleeved 3.5mm aux cable. Then i just plugged that aux into the tablet.
Volume was at full for the tablet and twisting the gold dial on the black box didn't do anything. Am I just missing something obvious? I didn't see any power switches with the brainiac audio equipment.