Akebono Front Pistons Info
I am rebuilding my calipers and created models of the stock front Akebono pistons. Leaving this here in case someone finds it useful.
Each is 34mm tall.
The lower body section is 25mm tall.
The upper lip is 3.5mm deep
The larger piston is 44.35 mm diameter
The smaller piston is 41.2 mm diameter
Both are made of steel.
__________________
@stupidtoycars | My track vids
09 7AT|MCS 2WNR|Topgunz Rotrex|Ecutek (Eugene)|Maxxis RC1|Titan-7 TS-5|OSG LSD|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler|Fismo|G-LOC R12/R10|Zeta III L|NLR Wing and Splitter|CJM Pan and Fuel Hat|Radium Surge Tank|AP Racing CP9668
|