Thread
:
Mr. G. Brettin's Slow Motion Leg Hump
View Single Post
05-07-2021, 09:49 AM
#
746
(
permalink
)
gbrettin
A True Z Fanatic
Join Date: Oct 2010
Location: Portage, MI
Posts: 2,284
Drives: Tricycle
Rep Power:
589151
I was hung up last night on using huge square aluminum stock I picked up for an oil collector. After chatting with a buddy, we landed on using round stock. -10 bungs will be welded to both ends and the center will have a -10 which points downward. The entire collector is about 2' long with the hole directly in the middle.
After the length of the oil collector was figured out I could cut my oil drains. Looks like I bought enough -10 hose to wrap up the collector to the scavenger. Not sure I will have enough from scavenger to pan. We'll see.
I'm going to put an inline oil filter to the scavenger pump. Well, because I don't trust the oil coming out of the turbo and then going through an expensive pump and then going into my expensive engine. I probably should also hook a gauge post pump so I can see flow or if the pump stops working. Hmmm.
Turbowerx link:
http://www.turbowerx.com/page8/page9/page9.html
gbrettin
View Public Profile
Send a private message to gbrettin
Find More Posts by gbrettin