Nissan 370Z Forum - View Single Post - What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

PaulZ370 · 03-09-2021, 04:52 PM

Installed Z1 Aluminum Hubcentric 10mm Wheel Spacers on her today. Just enough to fill out the Wheel Wells without pushing the wheels outside the body. Also, 10mm (or 0.4") is just 0.1" less than how the NISMO wheels sit in the wheel wells. In my mind, this keeps my 370Z within the factory design specs of the suspension. It's also a subtle change so you can see a difference, but just can't tell what was changed - just like I like it.

PS: Had to use the extended studs as recommended by Z1. We tried the 10mm spacers with the stock studs and could only get 4-1/2 turns on the lugs instead of the 5 turns needed...

IMG_20210309_112938-1.jpg FRONT
IMG_20210309_113023.jpg REAR
IMG_20210309_113324.jpg
IMG_20210309_111628.jpg

03-09-2021, 04:52 PM	#5193 (permalink)
PaulZ370 Track Member Join Date: May 2011 Location: Covington, LA Posts: 956 Drives: 011 370 BSM/T/SP/6MT Rep Power: 16	Upgrades! Installed Z1 Aluminum Hubcentric 10mm Wheel Spacers on her today. Just enough to fill out the Wheel Wells without pushing the wheels outside the body. Also, 10mm (or 0.4") is just 0.1" less than how the NISMO wheels sit in the wheel wells. In my mind, this keeps my 370Z within the factory design specs of the suspension. It's also a subtle change so you can see a difference, but just can't tell what was changed - just like I like it. PS: Had to use the extended studs as recommended by Z1. We tried the 10mm spacers with the stock studs and could only get 4-1/2 turns on the lugs instead of the 5 turns needed... IMG_20210309_112938-1.jpg FRONT IMG_20210309_113023.jpg REAR IMG_20210309_113324.jpg IMG_20210309_111628.jpg __________________ *BD2ZBN :: 2011 BSM/TRG/SP/6MT/Stillen Oil Cooler/K&N CAI/Michelin PSS/Brake Light/EIBACH Sway Bars/FI Res. HFC+18" Res. CBE/Morimoto XB LED/DRLs/10mm Spacers* Last edited by PaulZ370; 03-09-2021 at 07:19 PM.