View Single Post
Old 03-07-2021, 01:21 PM   #5 (permalink)
tchertel
Base Member
 
tchertel's Avatar
 
Join Date: Dec 2019
Location: California
Posts: 66
Drives: 2014 SC 370z
Rep Power: 5
tchertel is on a distinguished road
Default

I just looked at my UpRev and for throttle position you will want your Throttle Sensor; this is your throttle position sensor and there are two sensors per throttle body. For manifold absolute pressure I see two options in UpRev; Manifold Absolute Pressure and Manifold Absolute Pressure Sensor Voltage. When I data log both these parameters I get 0.00mV on Manifold Absolute Pressure and it does not change from even when I rev the engine (exactly what you stated in your post). However the Manifold Absolute Pressure Sensor Voltage I do get a voltage reading that changes as you vary the RPM although I don't have much faith in the actual voltage reading as I see a range 200v at idle down to 80v at some other higher RPM however seems to show that the sensor is reading. I don't see any other way in UpRev to measure the actual manifold pressure but maybe there is a conversion from the voltage reading on the sensor to pressure.
__________________
2014 370z Touring Sport, Stillen supercharger, cat-back and oil cooler
tchertel is offline   Reply With Quote