Quote:
Originally Posted by Ļon
Mine came in today, curious though did yours come with pre-punched holes as shown in their install guide? Mine has none  if not what did you use to punch the holes? |
I believe it was blank. I placed boot inside the console cover and pressed it against the locator pins. In otherwords, I worked from inside out. The pins made an impression on the leather and I punched out accordingly.
I used these:
https://www.amazon.ca/Leather-KangTe...13056678&psc=1
You can also use this style:
https://www.amazon.ca/SE-7924LP-9-In.../dp/B000NK5VY2
I prefer the pin punch type. its more portable and you can re-sharpen. I used a block of wood behind the boot so as to not dull or damage punch.