Quote:
Originally Posted by abm89
@ Rusty it's on sandwich plate. looks like some slight leaks on the line connections to the core. I suggested using gasket tape on the AN fittings and making sure the sandwich plate is sealed/torqued properly. I had my plate back out slowly over time, but NEVER had a leak like what was shared.
|
Don't need tape on AN fittings to hoses. Did they use new O-ring on original oil cooler to crankcase? If it was disturbed, (which it would be because of sandwich plate install) it will leak.
You can use tape on the taper fittings going into cooler and sandwich plate, but leave first two-three threads clean!!
zz