Hey So I think I might have narrowed my problem down to the two plastic push pin sensor on the clutch pedal. There is one that is pushed down when the clutch is all the way up and engaged and one that is pushed when the clutch is all the way down. And there is a little white plastic stopper that pushes the pin in for each. The stopper for the button that is pushed in when the clutch is out and engaged is about a centimeter to high so the button isn't all the way pushed in. Could anyone check on their z and see if that stopper is centered on the pin?
https://www.dropbox.com/s/yrv35sbe60..._3360.mov?dl=0