Test Fit Wheel Spacers
Hey everyone,
I 3D printed some test fit wheel spacers when determining what size wheel spacer looked best with my wheel setup. I prefer to actually see the wheels with different spacers instead of just measuring the gap and hoping that the measured size of spacer will look right. These are super useful so you don't have to buy and return spacers to get the right fitment. These would also be useful for testing different offsets (on your current setup) for ordering a new set of wheels.
I'm wondering if anyone else would be interested in these. I can sell a bundle with a 10mm, 5mm, and some 1mms for a pretty low price. I can also make custom thicknesses or different bolt patterns if anyone wants. Let me know!
** Obviously these are for testing only and should not be driven on. With these on, I only tightened down the lug nuts just enough to secure the wheel to the hub, lowered the car down, analyzed fitment, then raised back up and removed off the car. I feel like I have to say this even though it should be obvious.... **
Last edited by Averying; 12-02-2020 at 07:56 PM.
|