Nissan 370Z Forum - View Single Post - New Part at Z1

JARblue · 11-25-2020, 10:02 AM

I installed MTec springs recently. IMNSHO the side-to-side slop is reduced more like 10-20%, rather than 5-10% like someone on myg37 said. The reverse gear gate exit seems to be a bit tighter/stiffer than normal but it doesn't bother me. Install was easy with the transmission out. Bit more difficult with the trans in, but still totally doable.

Probably not much need for these springs. I did the install because ... well, why the hell not?

11-25-2020, 10:02 AM	#17 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	I installed MTec springs recently. IMNSHO the side-to-side slop is reduced more like 10-20%, rather than 5-10% like someone on myg37 said. The reverse gear gate exit seems to be a bit tighter/stiffer than normal but it doesn't bother me. Install was easy with the transmission out. Bit more difficult with the trans in, but still totally doable. Probably not much need for these springs. I did the install because ... well, why the hell not? __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|