Joey Z,
You can buy everything, but the problem is the the two wires from the BCM to the wiper motor. The wiper motor has a three wire connector, pin 1 is power , pin 2 not used (not even there), pin 3 is ground and pin 4 is for parking the wiper. You will have to run two wires from the BCM to the hatch on the the left side through the gromet that connects the body to the hatch. Know comes the hard part, I have been unable to find the wires in any manual that shows which connector/s that have the wires that go to the rear wiper motor. One wire from the BCM is for PIN 1 and the other wire is for PIN 4. pin 3 IS EASY IT'S GROUND AND ATTACHES TO THE HATCH DIRECTLY FROM THE MOTOR. If you have any luck finding these two pin locations on the BCM let me know.
Best Regards and good luck
Javier
|