Nissan 370Z Forum - View Single Post

froiwok · 08-25-2020, 11:46 AM

Update:
Blew the 80a fuse on the power wire O'Reilley's only had 60a fuses so it'll have to do for now. After doing some extra research I'm worried that I didn't get a good enough amp wiring kit. It's 4g wire but it's 90% aluminum 10% copper, 80a inline fuse and my amp has 3 40amp fuses on the back of it.

The way I had it setup was the 2 Subwoofers were set at 1ohm so I believe they should be getting 1200watts

So I think I should have gotten the knukonceptz 4g kolossus wiring kit and I don't want to go back through with rewiring T-T

Also there's definitely something wrong with the subwoofer that was rattling/buzzing. When I press down on both cones the one making the noise has a little bit of resistance.

08-25-2020, 11:46 AM	#9 (permalink)
froiwok Base Member Join Date: Aug 2017 Location: Overland Park, KS Posts: 50 Drives: 2013 370z Base 7AT Rep Power: 8	Update: Blew the 80a fuse on the power wire O'Reilley's only had 60a fuses so it'll have to do for now. After doing some extra research I'm worried that I didn't get a good enough amp wiring kit. It's 4g wire but it's 90% aluminum 10% copper, 80a inline fuse and my amp has 3 40amp fuses on the back of it. The way I had it setup was the 2 Subwoofers were set at 1ohm so I believe they should be getting 1200watts So I think I should have gotten the knukonceptz 4g kolossus wiring kit and I don't want to go back through with rewiring T-T Also there's definitely something wrong with the subwoofer that was rattling/buzzing. When I press down on both cones the one making the noise has a little bit of resistance. __________________ \| UpRev \| Whiteline \| Swift \| SPL \| Invidia \| K&N \| Z1 \| ISR \| HKS \| Polk Audio \| Infinity \| Alpine \| Kenwood \| SoundQubed \| Zenclosures \| Fortin \| Morimoto \| Avery Dennison \| CQuartz \| Vicrez \| ESR \|