Nissan 370Z Forum - View Single Post - Cmak clutch bleed, 1/2 inch play, not coming up

NissanTracker · 08-24-2020, 06:59 PM

Hi forum,

Just finished a Zspeed clutch install with the cmak. Been trying to bleed it for over an hour. Issue is, when I press the clutch pedal down, it comes back up 95% of the way. There is a very small amount of play that I have to pull the clutch pedal up manually. Any ideas?

I upgraded to the wilwood master cylinder and measured the OEM length with calipers and set it to the wilwood. Pedal distance from the floor looks exactly like I had it before, almost level with the brake pedal

08-24-2020, 06:59 PM	#1 (permalink)
NissanTracker Track Member Join Date: Jun 2016 Location: Massachusetts Posts: 724 Drives: 07' Nismo, 14' Nismo Rep Power: 29262	Cmak clutch bleed, 1/2 inch play, not coming up Hi forum, Just finished a Zspeed clutch install with the cmak. Been trying to bleed it for over an hour. Issue is, when I press the clutch pedal down, it comes back up 95% of the way. There is a very small amount of play that I have to pull the clutch pedal up manually. Any ideas? I upgraded to the wilwood master cylinder and measured the OEM length with calipers and set it to the wilwood. Pedal distance from the floor looks exactly like I had it before, almost level with the brake pedal Last edited by NissanTracker; 08-24-2020 at 08:31 PM.