Ignition coil testing
Quick question, per the FSM it states resistance should not be at zero or infinite (pin 1/2) and at zero for pin 1/3 2/3.
That’s obviously quite the range there and I see most coil packs have substantially lower resistance than the the readings I’m getting. For example, on pin 1/2 I’m getting 2000ohms and on pin 1 and 3 I’m getting 184,000 OHMs of resistance. Like holy cow! I know that the FSM says that’s within spec but is that normal ?
I’ve been trying to track down a misfire on my car for months now. Replaced MAF, tested injectors ( all at 12.4-12.6ohms) replaces air filters now I’m moving on to coil packs and spark plugs.
__________________
Stillen G3, z1 Intake Manifold, Stillen Headers, Z1 HFC's, Stillen Catback. 330whp 267 ft- lbs tuned at Z1 motorsports.
Last edited by Wilson2608; 08-07-2020 at 12:46 PM.
|