Nissan 370Z Forum - View Single Post

sirnixalot · 07-30-2020, 09:11 AM

I adjust them as per that fsm page and use ecutek to view the voltages

I did not adjust the vvel arms in any way.

All parts came off a known good motor and all values were as they are supposed to be.

The power is good up until 6500 in 3rd, the shut down happens higher up in the rpm range in the lower gears, it happens at 5500rpm in 4th, the island is too small to even try a 5th gear with pull.

Which is why I think it’s load dependent.

07-30-2020, 09:11 AM	#9 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57454	I adjust them as per that fsm page and use ecutek to view the voltages I did not adjust the vvel arms in any way. All parts came off a known good motor and all values were as they are supposed to be. The power is good up until 6500 in 3rd, the shut down happens higher up in the rpm range in the lower gears, it happens at 5500rpm in 4th, the island is too small to even try a 5th gear with pull. Which is why I think it’s load dependent. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap