View Single Post
Old 06-07-2020, 09:55 PM   #38 (permalink)
NitroZ
Base Member
 
Join Date: May 2016
Location: Reno, Nv
Posts: 18
Drives: 2009 370Z Touring
Rep Power: 9
NitroZ is on a distinguished road
Default

Quote:
Originally Posted by RonRizz View Post
Looks like your removing a door panel. Takes about 3 minutes. With practice, less than 1 minute. Pry up on window control panel at bottom edge, disconnect harness. Pry out small panel in front of door handle, remove 10mm bolt. pry out small access panel below door handle near center of door, remove 2 10mm bolts. Grab edges of panel, and pull off gently. pop 2 door control cables out of brackets. Done. Find and fix rattle. Easy peasy
I wish it was easy peasy. Took inside door panel off. Wiring. Insulated. Tied things together. No obvious rattle or anything loose. Used black silicone to help hold all the plastic buttons in place. Everything that was even remotely loose was stabilized. Its either inside the door or related to whatever moves the window up or down or something else. It sound like if you were to cups your hands together and shake two or three bottle caps. More plastic than metallic. SO annoying.
NitroZ is offline   Reply With Quote