Quote:
Originally Posted by jchammond
Probably would have been 5/600 
Really easy working with the large diameter pipes & band clamps 
The U-bolt clamps put a crimp & make it more difficult to remove in future  |
I would believe the tail pipe could be that much.
The muffler used a band clamp which was nice. Wasn't hard installing the 1st elbow into the muffler. Put some lubiplate grease on the inside of the muffler and outside of the elbow. And tapped the elbow right in.
Had to use a u-bolt clamp for the 2nd elbow. Made the straight section 3" longer so that the stainless tip sticks out farther. The heat from the exhaust was starting to melt the stone shield on the tow bar for the Jeep.