Quote:
Originally Posted by SonicVQ
The condenser is difficult to find as it is taped to the wiring harness that is under the upper intake.
This is what it looks like:
|
Thank you!!!!
Little progress: I tried osciloscope today. On cylinders which are OK, there is 5-6V signal on signal wire on coils. On fourth cylinder, there si similar signal, but only 2-2,5V.
Wire from ECM to coil plug seems to be OK (checked with multimeter).
I really hoped, that problem is caused by bad wire, but It kinda looks like ECM problem
Should I try to change signal wire from ECM to coil? According to my uncle (electrician) wire is 99% OK.