The glass is not that hard to get out. There is a bolt that goes through the rear bottom of the glass and then a clamp that you loosen on the front bottom of the glass, then it slides out. Its easier if you remove the felt strip on the inside side of the top of the door since it will leave a bigger gap for the window to come out. The felt piece is just pressed into place.
If you dont want to take the window out you can reach into the speaker opening of the door after taking the speaker mount out and feel for the plastic tensioner piece. I think if you wedged a firm block of foam between it and the metal panel it would probably get rid of the noise. You will need some skinny arms though.
I wouldn't put anything at the top since if you dont let the window close all the way you might damage the regulator and it wont seal the rain out.
|