Quote:
Originally Posted by thavent
My oil pressure reads about 15 psi at 200 degrees at idle, do you think this is ok or a bit low? Should I look into changing the gaskets that many mention? Thanks!
|
You are fine. The factory spec is more than 14 psi at 80C/176F with an idle of 600-700 RPM.
Also keep in mind most gauges have a typical accuracy of +/- 1-3% of full scale. For a 100 PSI gauge with 1% accuracy it can be off 2 psi (+1 or -1)
Now, if it is consistently around 10 psi at idle, then it may be time to look into gaskets.