Quote:
Originally Posted by -ZS-Carpenter
Never used one.
How large of holes are you drilling? If it's just 3/16 or 1/4 for tapcons (get Hilti E Z ancors, thank me later) just get good bits with the flat spots on them. Cordless drills do ok on those as long as it has a newer style chuck that clicks as it closes. Even up to 3/8 would be ok.
https://www.hilti.com/c/CLS_FASTENER...ORS_7135/r6271
I use the 1/4" at work all the time. They can be reused 100s of times if you don't strip the head or bend them. They hold way better than tapcons too. |
Nothing specific or heavy duty. But I am familiar with the Hilti anchors. I just want the adapter so I can use normal 1/4" shank drill bits and drill accessories on the rotational drill setting (without hammer). I expect most usage will be interior, so drywall and wood primarily.