View Single Post
Old 04-12-2020, 08:23 AM   #321 (permalink)
gbrettin
A True Z Fanatic
 
gbrettin's Avatar
 
Join Date: Oct 2010
Location: Portage, MI
Posts: 2,284
Drives: Tricycle
Rep Power: 589151
gbrettin has a reputation beyond reputegbrettin has a reputation beyond reputegbrettin has a reputation beyond reputegbrettin has a reputation beyond reputegbrettin has a reputation beyond reputegbrettin has a reputation beyond reputegbrettin has a reputation beyond reputegbrettin has a reputation beyond reputegbrettin has a reputation beyond reputegbrettin has a reputation beyond reputegbrettin has a reputation beyond repute
Default

From IG @gbrettin

This Fast Intentions exhaust is going back on my 370z. guess we'll know what a V8 sounds like through Fast Intentions exhaust. But first i'm going to polish it out.

Custom pan being made for the Z, way out of my swim lane. Letting the pros knock that one out.

Time to knock my pin on hood mould out! (I like the British spelling for mould). Composite Envisions still cranking out shipments, thank you. Their site says they are taking all the Covid-19 precautions while working and more importantly, I trust them they are. Their support staff has been great to deal with when ever I have questions or need assistance! Highly recommend!

Bolts came in for the flywheel. Tightened them down to spec, 85ft/lb, and managed to punch my head with an 85ft/lb thump...

The "big" 4L80e is in the Z. It fits no problem . TBH, stock 7AT is larger and blows up at 450hp. This one can hold about 1500.

Final layer for pin on hood mould. My safety gear is for fighting all the Covids of 19. * Edit * ... It needs two more layers...

Last leg of the night and done. Made room for turbo piping. ... I'm beat.

Took off the harmonic balancer, put it on, pulled it off, put it on --- then got my timing marks set up on the harmonic balancer and my @motionraceworks timing pointer. Why didn't I do it the first time I put it on? Squirrel... Moving on... I notched out an area for turbo plumbing. Welds will go where the missing pinch welds are. As far as the pin on hood goes, I need to put two more layers of fiberglass on... Heh. Thanks for all the help everyone!

Two 3" boost actuated dumps came in. At 5/6 lbs of boost my car will bypass the Fast Intentions 2.5" exhaust and switch automatically to open dumps near the turbo. This is the best of both worlds, quiet exhaust when cruising and open hells gates when I'm into the gas.

----------------------------------------

Picture heavy since I was working on my car and hood the last few days.

F.I. Exhaust and Loud Valve



Custom Pan










Composite Supplies!






Transmission Installation











Mould reinforcement







Making room for turbo piping


Caught my hand inbetween car frame and ratchet. Impact facilitated the hand crushing.










Last edited by gbrettin; 04-12-2020 at 08:57 AM.
gbrettin is offline   Reply With Quote