Nissan 370Z Forum - View Single Post

javi370z · 04-09-2020, 07:38 PM

3 port boost solenoid. Doesn’t change with one or two turbos. Run a boost pressure source to port 1 on the solenoid, vent port 3, port 2 to the top of the wastegate or wastegates. Boost source to the bottom of the gates. If your running 2 gates use tees to join the hoses, use brass tees or similar not plastic. Heat wrap the hoses

04-09-2020, 07:38 PM	#10 (permalink)
javi370z Base Member Join Date: Nov 2012 Location: dallas Posts: 118 Drives: 370z Rep Power: 13	3 port boost solenoid. Doesn’t change with one or two turbos. Run a boost pressure source to port 1 on the solenoid, vent port 3, port 2 to the top of the wastegate or wastegates. Boost source to the bottom of the gates. If your running 2 gates use tees to join the hoses, use brass tees or similar not plastic. Heat wrap the hoses Last edited by javi370z; 04-09-2020 at 09:49 PM.