Nissan 370Z Forum - View Single Post

gbrettin · 03-30-2020, 10:11 AM

A couple days ago I mixed up some more tooling gel and filled in areas that were ground out. That completely hardened and I set in on getting some ideas for a cowl. Ideally I would do mock up on the hood when it's released from the mold; but hey, I've got a little time to kill right now.

After going through some of the required dimensions, all I can say is wow... the Whipple charger sticks out of the hood like a mountain. I guess anyone that decides to go with an LS swap and uses a high ram could use the cowl too.

03-30-2020, 10:11 AM	#298 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,277 Drives: Tricycle Rep Power: 589150	A couple days ago I mixed up some more tooling gel and filled in areas that were ground out. That completely hardened and I set in on getting some ideas for a cowl. Ideally I would do mock up on the hood when it's released from the mold; but hey, I've got a little time to kill right now. After going through some of the required dimensions, all I can say is wow... the Whipple charger sticks out of the hood like a mountain. I guess anyone that decides to go with an LS swap and uses a high ram could use the cowl too.