Brace is now installed. Didnt have to remove the exhaust or anything else to install. It fit perfectly. The brace mounted next to the midlinks like Rusty said. It was a very simple install, the hardest part was getting the bolts started on the subframe because the V-brace is kinda in the way - but even that was pretty simple. You can get a normal wrench inside the sub frame to hold down the nut, but an offset wrench would make life a tad bit easier.
Couldnt get a torque wrench on the top bolt to the differential, so I had to just guestimate the torque. When I test drove after installing, I could definitely feel the difference.
__________________
-Drop in K&N Filter -Invidia Gemini CBE -Z1 Oil Cooler -Swift Springs - EcuTek -Forgestar F14 -SPL Camber Links -Akebono BBK Upgrade -Z1 Premium SS Lines -SPL Diff Bushings -SPL FUCAs - BellRaceworks Diff Brace
Last edited by bunk; 03-05-2020 at 05:55 PM.
|