Quote:
Originally Posted by BildoDabbins
So trying to remove the caliper with the
19mm box end and I've been smacking it with a hammer....
The top one came out with a few taps but I was able to fit the 1/2" ratchet in there and smack it with my hand but the bottom one is so damn stubborn just bought some wd40 and sprayed them down so I can hopefully break them free
I got 2 bolts in and I'm at a dead end currently if I can't get these off lol hopefully this wd40 helps me crack them loose wish me luck
Sent from my moto g(7) power using Tapatalk
|
I hit it with a rubber mallet. You may also want to use some PB Blaster. It's much better then WD-40.
__________________
~Rob 
-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...
|