Quote:
Originally Posted by Gray Goose
I thought about wet sleeving as well. But I read, in multiple places, that there are temp issues after. I will be driving this on the road as well and do not want temp issues.
|
I have read the same. Most I read about were pushing water. Only one way to do that and that is if the sleeve machine work was not done properly. I would suspect headgasket issues from a sleeve dropping. I am still researching this. Just any old machine shop won't do. Darton East had major issues years ago from what I was reading. The machine shop must have a 3 or 4 axis CNC and the tolerances are a thousandth to 1/2 a thousandth. It has to be perfect.