Quote:
Originally Posted by Jinxx
No insult was applied ... it was a observation and a statement on your picture .. there isn’t much that would cause it to look like that other than grease that didn’t go through the zerk ... you are complaining that you had to grease your turbo more than needed and then post a picture showing where grease didn’t go into the zerk and ask for clarification ... but refuse to consider that maybe you didn’t grease it correctly. .. what more do want anyone to tell you ... being the fact that you’re not a amateur and this isn’t your first kit or platform.
|
Alright, let's analyze it and feel free to correct me.
1. If it still was my mistake, the only way I see it possible is I completely missed the zerk and just decided to blast the under side of the turbo with grease and completely ignored said grease. Seems quite unlikely.
2. The way it appears to have pooled suggests it was in a liquid state at the time. It is not liquid when pumping. But in the spirit of fairness it
could have been point 1, and after taking it out and heating up it liquefied on the outside I suppose.
3. If we accept it was liquid at the time of leaking/pooling on the under side and I am correct in saying there wasn't a single smidge of grease on it when I finished and cleaned up, then that only leaves a leak with an, as of now, unknown cause.
4. Judging by the photo it is unlikely it leaked from the tip of the zerk, and appears it may have come from the base of the zerk on the CHRA somehow. How? I have no idea, hence all of this.
5. It's possible that black crap isn't grease at all and something else altogether. But then why so specifically in that area in that shape around the zerk base?
Me refusing to consider your explanation is not an ego thing, but when considering point 1 and possibly 2, makes it seem ridiculous. I had already considered it and given the observations above still felt it made no sense and sought other possible ideas on here. So... sorry?
Quote:
Originally Posted by jchammond
I know this grease gets hot enough to liquify somewhat, and if perhaps the spring behind ball on grease zerk is a tad weak, I can see some seeping past it & causing a little buildup.
Options would be like what Caterpillar & some other Heavy Equipment vehicle’s have, would be to have a removable plug & then install grease zerk, lube, remove & plug.
Meritor also uses this on some of their HD truck suspension applications  |
I'd be fine with something like that were it an option.