Quote:
Originally Posted by Jinxx
There wouldnt be any way for grease to leak out from the zerk around o-ring. ... the zerk is a hollow bolt that goes through the coolant chamber and threads in the bearing housing .. looks like the grease didn’t go in the zerk and built up around it on the outside
|
Little insulting you think I'm that much of an amateur. Not my first kit or platform. What is absolutely baffling me is why no one can seem to offer any suggestion to why I had to re-grease the turbo, half way through it's normal service interval with an amount well over the standard recommended amount (by COMP themselves no less)... with a Turbo that has since been confirmed there was a batch of them with some kind of zerk fitting issues. It still isn't sitting well with me and while I greatly appreciate Sasha's support, I can't help but hold onto some concern as to why it happened even time I give it a boot, and if I could just nail down the reason hopefully I can take some pre-emptive action and possibly help someone else identify signs to look out for.
Regardless. I've since cleaned off the marks, and keen to see if it'll happen again.