Quote:
Originally Posted by Rusty
Double check the stub axles for bolts. Get new carrier bearings and stub seals. It's best if you get the bearings pressed on to save on time. The shop that I used to use closed up because the owner past away. I used to be able to just walk in with small stuff. Now I have to wait anywhere from a couple of days to a month.
|
Unsure about the OS-Giken unit; but the Wavetrac has 2-flats on both ends of it...about 14mm thick.
Can’t remember the size/ as i would buy an inexpensive wrench & grind it down thin to fit. Would make easier to hold while torquing ring gear bolts
