My plan once I can get in there, is to go for a FULL 4" to 3.5" at the supercharger inlet, or at least a full 3.5" intake. The plan is to hollow out the hole as much as possible so that its surface area (which is in the shape of a rectangle) is equivalent to 3.5"/4" diameter circle with smooth transitions to 4" or 3.5" circle at each end... ready for an elbow or filter, with one extra something special. This is a rough idea of the most critical part. Will be using my 3D printer. PLA or NYLON with silicone couplers/sheets and steel zip ties for connecting the rectangular sections.
Last edited by Senna-F1; 11-13-2019 at 07:13 PM.
|