Nissan 370Z Forum - View Single Post

Corsairprime · 10-28-2019, 10:32 AM

A decent nutsert tool combo can be had on Amazon.com I google searched nutsert tools and the second link was to amazon. The additional nutsert collars can also be had there. I used the M6 variety because they match the Nissan factory 10mm headed bolts that are all over the car.

I used a step-drill bit to open up the lower front cross brace holes. Adding the nutserts there makes the whole under tray install just clean and tight.

This might be a repeat of an earlier post, but I wanted to echo the positive results that I had doing this simple replacement. I really do not like the plastic push rivets for everything.

10-28-2019, 10:32 AM	#2 (permalink)
Corsairprime Base Member Join Date: May 2014 Location: Frisco, TX Posts: 215 Drives: 14 370Z Nismo GM 6MT Rep Power: 3545	Nutsert Tool A decent nutsert tool combo can be had on Amazon.com I google searched nutsert tools and the second link was to amazon. The additional nutsert collars can also be had there. I used the M6 variety because they match the Nissan factory 10mm headed bolts that are all over the car. I used a step-drill bit to open up the lower front cross brace holes. Adding the nutserts there makes the whole under tray install just clean and tight. This might be a repeat of an earlier post, but I wanted to echo the positive results that I had doing this simple replacement. I really do not like the plastic push rivets for everything. __________________ Corsairprime 2014 Nismo #462, GunMetal Grey, GT-R Start Button, AAM S-Line/R-Line intake and S-Line exhaust, Berk HFCs, Osiris Tuned at JoTech