Quote:
Originally Posted by Ghostvette
At this point, it might. ...
|
I guess I don't have anything to lose by trying it. If it works on the barrel, it may work on the threaded magazine, too.
The receiver is 8.125" long, so I will need at least 8.25" of oil. A Q&D measurement says a cut off bleach bottle may work but won't have much head room. Need to find a container that is smaller in diameter. A 12" welding rod can would probably work very well.
I tried heating it up with a hair dryer and then spraying the barrel with a can of compressed "air" turned upside down - still stuck.
Not many good highways between here and there. Or anywhere else. But lots of nice winding roads if one is in a sports car.
