The Shift S3ctor event we have in California has strict requirements for cars that can run 180+.
CARS EXCEEDING 180MPH:
To further emphasize these points in our 2019 Rules and Regulations at the link above, it is required that all participants exceeding 180mph have the following gear and safety equipment:
Helmet – Snell SA2010 or newer (same as all participants)
Gloves – SFI-rated
Fire Suit – SFI-rated
Seat Belts – Properly installed SFI or FIA rated harnesses with at minimum 4-points.
Roll Bar – minimum of 4-points
Fire Extinguisher – mounted within reach of driver
Neck Restraint – HANS device or similar
To be licensed to go 180+mph, each driver must do two solo passes (one in each lane) between 170mph and 180 mph. This is to ensure that you can do a safe pass at that speed as observed by our staff. Once we see and have record that you have accomplished two safe passes, you will be permitted to exceed 180+ so long as the participant and vehicle have the proper safety equipment.
Qualifying for a license on Saturday will be good for both days of the event.
Licenses issued in our records to drivers at any previous Shift-S3ctor events will carry over. You do not need to go through licensing again if you already did at a prior event with Shift-S3ctor.
If you exceed 180MPH without the required safety equipment, you will no longer be able to participate in the event.
__________________
Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo
700+whp
|