Nissan 370Z Forum - View Single Post

sirnixalot · 07-09-2019, 10:47 AM

Probably not the right section but it's valve cover related?

Using hose clamps on braided AN hose is just...not for me. I was thinking about 3d printed 8AN male bungs with a stepped ID bore to slide over the valve cover breather ports and epoxy on. Or maybe having some machined from delrin?

I know you couldn't crank down on the fittings but it would make for a "cleaner" connection?

Am I barking up the wrong tree?

07-09-2019, 10:47 AM	#1 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57454	3d printed AN bung? Probably not the right section but it's valve cover related? Using hose clamps on braided AN hose is just...not for me. I was thinking about 3d printed 8AN male bungs with a stepped ID bore to slide over the valve cover breather ports and epoxy on. Or maybe having some machined from delrin? I know you couldn't crank down on the fittings but it would make for a "cleaner" connection? Am I barking up the wrong tree? __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap