Nissan 370Z Forum - View Single Post - Kenwood head unit

chalmene · 06-08-2019, 05:49 PM

Vehicle: 14' 370z Sport (non-bose, non-nav)

Stereo to install: Kenwood DNX995s

Needing some answers from someone who has installed this head unit, or similar. Yes I've been all over the forums, Youtube, and product manuals and seem to come up with mixed results.

I bought the Axxess ASWC-1 module as recommended by Crutchfield to retain steering wheel controls. (side note, this module did not come with the programming buttons or lights as described or in videos, and seems to be self-programming)

Questions:

The Kenwood DNX995s wiring harness comes with a wire labeled "steering wheel remote input". Can this be used directly with my car's stereo harness without the Axxess module?

If not, can someone give clear instructions or a diagram on how to wire in the Access module?

06-08-2019, 05:49 PM	#1 (permalink)
chalmene Base Member Join Date: Nov 2018 Location: FL Posts: 32 Drives: 2014 370z Sport Rep Power: 7	Kenwood head unit - steering wheel controls Vehicle: 14' 370z Sport (non-bose, non-nav) Stereo to install: Kenwood DNX995s Needing some answers from someone who has installed this head unit, or similar. Yes I've been all over the forums, Youtube, and product manuals and seem to come up with mixed results. I bought the Axxess ASWC-1 module as recommended by Crutchfield to retain steering wheel controls. (side note, this module did not come with the programming buttons or lights as described or in videos, and seems to be self-programming) Questions: The Kenwood DNX995s wiring harness comes with a wire labeled "steering wheel remote input". Can this be used directly with my car's stereo harness without the Axxess module? If not, can someone give clear instructions or a diagram on how to wire in the Access module? __________________ ~ 14" 370z Sport MT - Hotchkiss sway bars - SPL links - South Bend Stage 2 clutch/flywheel/CMAK ~